Skip to main content

Technical drawing - How to create a isometric drawing of a cube using set sqaure

Comments

Post a Comment

Thank You for your valuable comment....
arish ibrahim

Popular posts from this blog

Draft Sight DRAWING EXERCISE

To draw isometric views for the orthographic diagram shown here           LIST OF COMMANDS USED Line, Hatch, Snap, Ortho, Isometric grid PROCEDURE 1.       Set Ortho on. 2.       Enter Snap command, enter G for grid style and the I for isometric then press enter. 3.       Enter Isometricgrid and select T or top 4.       Enter Line command 5.       Select start point 6.       Specify next point: 40 7.       Specify next point : 15 8.       Specify next point : 20 9.       Specify next point : 15 10.   Specify next point : 20 11.   Specify next point: 60 12.   Specify next point: 8...
Post a Comment
Read more

Draft Sight- Orthographic view of V block

Orthographic views for the pictorial diagram-V Block  LIST OF COMMANDS USED Line PROCEDURE 1.  Set the dimensions in mm and drawing boundary 210 x 297 mm 2.  Select line command icon in draw toolbar or type command LINE in command window. 3.  For Front View Specify start point» 0,0 [ENTER] 4.  Specify next point» @0,10 [ENTER] 5.  Specify next point» @-10,0 [ENTER] 6.  Specify next point» @0,60 [ENTER] 7.  Specify next point» @-10,0 [ENTER] 8.  Specify next point» @-25,-25 [ENTER] 9.  Specify next point» @0,-5 [ENTER] 10.  Specify next point» @-10,0 [ENTER] 11.  Specify next point» @0,5 [ENTER] 12.  Specify next point» @-25,25 [ENTER] 13.  Specify next point» @-10,0 [ENTER] 14.  Specify next point» @0,-60 [ENTER] 15.  Specify next point» @-10,0 [ENTER] 16.  Close 17.  Using the snap function draw the projection lines (thickness 0.15mm), Top view and side ...
Post a Comment
Read more

BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE IN DRAFTSIGHT

8.       BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE. Aim To understand creating and editing blocks in DraftSight software. Blocks                                                A Block is a collection of entities bound together as a single entity. After creating a Block, we can insert it whenever we need it in a drawing. When you use the MakeBlock command, the symbol is recognized in the current drawing only. The MakeBlock command write a symbol to an external drawing file for use in any drawing. Click the MakeBlock icon on the Draw toolbar. The Block Definition dialog box is displayed. Name: Enter name. Description: Enter description. Units: Select Millimeters. Block entities: Click the Select in graphics a...
5 comments
Read more