Skip to main content

BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE IN DRAFTSIGHT


8.      BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE.
Aim
To understand creating and editing blocks in DraftSight software.

Blocks                                               
A Block is a collection of entities bound together as a single entity. After creating a Block, we can insert it whenever we need it in a drawing. When you use the MakeBlock command, the symbol is recognized in the current drawing only. The MakeBlock command write a symbol to an external drawing file for use in any drawing.
Click the MakeBlock icon on the Draw toolbar.
The Block Definition dialog box is displayed.
Name: Enter name.
Description: Enter description.
Units: Select Millimeters.
Block entities: Click the Select in graphics area icon.
Specify entities>> enter
To insert a block Click Insert, Block from the Main menu. The Insert Block dialog box is displayed. The
Insert Block dialog box provides the ability to select created symbols. Select the created block and specify the position in drawing where it can be inserted.
Position X:
Position Y:
Click
OK.
Explode a Block
DraftSight provides the ability to explode a Block into its component entities. A Block loses its characteristics when exploded, and only a uniform scaled Block can be exploded.
Click the Explode icon on the Modify toolbar.
Specify entities>>

Comments

  1. Is there a way to delete a block from the "Insert Block" library? Right now I have a lot of blocks that I do not want to use but they are still in the list. Thanks.

    ReplyDelete
  2. I would use some help just as my friend above - I've made a block and made it unexplode'able ... Would save some time if there was a way to undo this.

    ReplyDelete
  3. Use the command "Purge"

    ReplyDelete
  4. Thanks a million for this tip ! I've been banging my head in despair for à cleanup of my extraneous or redundant blocks...

    ReplyDelete
  5. PUBG CASINO - Las Vegas, NV - Mapyro
    PUBG CASINO. 2021-08-30 10:00 AM. $3,600. 광주광역 출장안마 2,750 sq. ft. 2,716 sq. ft. 898 square meters. 3,706 hotel rooms. View 거제 출장마사지 Map. 1 Map. 3,706 rooms. 천안 출장안마 View 태백 출장샵 Map. 3,706 고양 출장샵 rooms. View Map. 3,706

    ReplyDelete

Post a Comment

Thank You for your valuable comment....
arish ibrahim

Popular posts from this blog

Draft Sight- Orthographic view of V block

Orthographic views for the pictorial diagram-V Block  LIST OF COMMANDS USED Line PROCEDURE 1.  Set the dimensions in mm and drawing boundary 210 x 297 mm 2.  Select line command icon in draw toolbar or type command LINE in command window. 3.  For Front View Specify start point» 0,0 [ENTER] 4.  Specify next point» @0,10 [ENTER] 5.  Specify next point» @-10,0 [ENTER] 6.  Specify next point» @0,60 [ENTER] 7.  Specify next point» @-10,0 [ENTER] 8.  Specify next point» @-25,-25 [ENTER] 9.  Specify next point» @0,-5 [ENTER] 10.  Specify next point» @-10,0 [ENTER] 11.  Specify next point» @0,5 [ENTER] 12.  Specify next point» @-25,25 [ENTER] 13.  Specify next point» @-10,0 [ENTER] 14.  Specify next point» @0,-60 [ENTER] 15.  Specify next point» @-10,0 [ENTER] 16.  Close 17.  Using the snap function draw the projection lines (thickness 0.15mm), Top view and side view.  18.  The line style of drawing modified to thickness of 0.70mm 19.  Dimension

Draft Sight DRAWING EXERCISE

To draw isometric views for the orthographic diagram shown here           LIST OF COMMANDS USED Line, Hatch, Snap, Ortho, Isometric grid PROCEDURE 1.       Set Ortho on. 2.       Enter Snap command, enter G for grid style and the I for isometric then press enter. 3.       Enter Isometricgrid and select T or top 4.       Enter Line command 5.       Select start point 6.       Specify next point: 40 7.       Specify next point : 15 8.       Specify next point : 20 9.       Specify next point : 15 10.   Specify next point : 20 11.   Specify next point: 60 12.   Specify next point: 80 13.   Specify next point: 60 and close 14.   Enter Isometricgrid command and enter R for right 15.   Select Line command 16.   Select start point left corner end 17.   Specify next point: 55 18.   Specify next point: 15 19.   Specify next point: 20 20.   Select star