LIST OF COMMANDS USED
Line, Circle.
PROCEDURE
1. Select the Line command icon in the Draw toolbar or type command LINE in
command window.
2. Command: _line Specify first point: 0, 0.
3. Specify next point» 5.5,0 [ENTER]
4. Specify next point» @0, 2.5 [ENTER]
5. Specify next point» @2.5, 0 [ENTER]
6. Specify next point»
@0, 2.5 [ENTER]
7. Specify next point»
@-1.5, 1.5 [ENTER]
8. Specify next point»
@-6.5, 0[ENTER]
9. For the last segment of the sketch, we can
use the Close option to connect back to the starting point. Inside the graphics
window, right-mouse-click and a popup menu appears on the screen. Select Close
with the left-mouse-button to connect back to the starting point and end the
Line command.
10. Select the Circle command icon in the Draw
toolbar or type command CIRCLE in command window.
11. Specify center point» 2.5,3 [ENTER]
12. Specify radius» D
[ENTER]
13. Specify diameter of circle» 2.5 [ENTER]
14. Type command CIRCLE in command window
15. Specify center point for circle» 5, 5 [ENTER]
16. Specify radius» D
[ENTER]
17. Specify Diameter of circle: 1.5 [ENTER].
18. Dimension the obtained figure using options from dimension menu.
19. Save the drawing.
Comments
Post a Comment
Thank You for your valuable comment....
arish ibrahim