Skip to main content

CREATING AND EDITING DIMENSION STYLES AND TEXT STYLES IN DRAFTSIGHT


CREATING AND EDITING DIMENSION STYLES AND TEXT STYLES

Aim                                   
To understand creating and editing dimension and text styles in DraftSight software.

Basic Dimensioning
DraftSight provides a full range of Dimensioning tools and utilities. We can use a variety of Dimensioning tools to display measurements of entities or relations between them in drawings.. Dimension Styles are the main method used to control the way Dimensions look. To create dimension click on the entity which a dimension is going to give and click ok.
Set Dimension
Style Click the Dimension Style icon on the Dimension toolbar. The Options - Drafting Styles dialog box is displayed with the Dimensions option expanded.
Modify Dimension Precision
Click the Dimension Style icon on the Dimension toolbar. The Dimension Styles Manager dialog box is displayed. Expand the Linear Dimensions option. View the Linear Dimensions options displayed on the right side of the dialog box. Precision: Select 0.00 from the drop-down menu. Click OK.
Angular Dimension
To Create an Angular Dimension Click the Angular icon from the Dimension toolbar.
Options: Enter to specify vertex or
      Specify entity»
Edit dimension and dimension text
The DimensionEdit command provides the ability to replace the Dimension text with new text, rotate the existing text, move the text to a new position, and if necessary, restore the text back to its home position.
The Dimension Text Edit command provides the ability to move and rotate Dimension text of any single Dimension entity.Text can be added to drawing using the tools Note and Simple Note drawing toolbar. Note Tool used for creating multiple text line entity .Simple Note tool displays text on screen as it is entered. Create Text lines of any position, orientation, justification, height and Text Style can be done using this tools.
Result
Study on creating and editing dimension and text styles is completed.

Comments

  1. How do you set Draftsight to always dimension in fractions without changing it every time you open the program?

    ReplyDelete

Post a Comment

Thank You for your valuable comment....
arish ibrahim

Popular posts from this blog

Draft Sight- Orthographic view of V block

Orthographic views for the pictorial diagram-V Block  LIST OF COMMANDS USED Line PROCEDURE 1.  Set the dimensions in mm and drawing boundary 210 x 297 mm 2.  Select line command icon in draw toolbar or type command LINE in command window. 3.  For Front View Specify start point» 0,0 [ENTER] 4.  Specify next point» @0,10 [ENTER] 5.  Specify next point» @-10,0 [ENTER] 6.  Specify next point» @0,60 [ENTER] 7.  Specify next point» @-10,0 [ENTER] 8.  Specify next point» @-25,-25 [ENTER] 9.  Specify next point» @0,-5 [ENTER] 10.  Specify next point» @-10,0 [ENTER] 11.  Specify next point» @0,5 [ENTER] 12.  Specify next point» @-25,25 [ENTER] 13.  Specify next point» @-10,0 [ENTER] 14.  Specify next point» @0,-60 [ENTER] 15.  Specify next point» @-10,0 [ENTER] 16.  Close 17.  Using the snap function draw the projection lines (thickness 0.15mm), Top view and side view.  18.  The line style of drawing modified to thickness of 0.70mm 19.  Dimension

Draft Sight DRAWING EXERCISE

To draw isometric views for the orthographic diagram shown here           LIST OF COMMANDS USED Line, Hatch, Snap, Ortho, Isometric grid PROCEDURE 1.       Set Ortho on. 2.       Enter Snap command, enter G for grid style and the I for isometric then press enter. 3.       Enter Isometricgrid and select T or top 4.       Enter Line command 5.       Select start point 6.       Specify next point: 40 7.       Specify next point : 15 8.       Specify next point : 20 9.       Specify next point : 15 10.   Specify next point : 20 11.   Specify next point: 60 12.   Specify next point: 80 13.   Specify next point: 60 and close 14.   Enter Isometricgrid command and enter R for right 15.   Select Line command 16.   Select start point left corner end 17.   Specify next point: 55 18.   Specify next point: 15 19.   Specify next point: 20 20.   Select star

BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE IN DRAFTSIGHT

8.       BLOCKS: CREATE, EDIT, IMPORT AND EXPLODE. Aim To understand creating and editing blocks in DraftSight software. Blocks                                                A Block is a collection of entities bound together as a single entity. After creating a Block, we can insert it whenever we need it in a drawing. When you use the MakeBlock command, the symbol is recognized in the current drawing only. The MakeBlock command write a symbol to an external drawing file for use in any drawing. Click the MakeBlock icon on the Draw toolbar. The Block Definition dialog box is displayed. Name: Enter name. Description: Enter description. Units: Select Millimeters. Block entities: Click the Select in graphics area icon. Specify entities>> enter To insert a block Click Insert, Block from the Main menu. The Insert Block dialog box is displayed. The Insert Block dialog box provides the ability to select created symbols. Select the created block and specify