Draft Sight- sectional orthographic views

Draw sectional orthographic views for machine part

LIST OF COMMANDS USED

Line, Hatch, Mirror

PROCEDURE

1. Select line command icon from draw tool bar or type command LINE in command window

2. Specify start point >>0,0 [ ENTER]

3. Specify next point >>@ 0.75,0

4. Specify next point >> @7.25,0

5. Specify next point >> @0,-.625

6. Specify next point >> @0.75,0

7. Specify next point >> @0,1.25

8. Specify next point >>@-1.5,0

9. Specify next point >> @0,1

10. Specify next point >> @-1,0

11. Specify next point >> @0,1

12. Specify next point >> @-3.75,0

13. Specify next point >> @0,-1

14. Specify next point >> @-1,0

15. Specify next point >> @0,-1

16. Specify next point >> @-1.5,0

17. Close the LINE menu

18. Draw the center line at middle of the entity

19. Draw a line having 2.25mmΦ and also symmetry with the centre line

20. Use hatch and fill in the portion where it required

21. Dimension the model and save it

Comments

Draft Sight DRAWING EXERCISE

To draw isometric views for the orthographic diagram shown here LIST OF COMMANDS USED Line, Hatch, Snap, Ortho, Isometric grid PROCEDURE 1. Set Ortho on. 2. Enter Snap command, enter G for grid style and the I for isometric then press enter. 3. Enter Isometricgrid and select T or top 4. Enter Line command 5. Select start point 6. Specify next point: 40 7. Specify next point : 15 8. Specify next point : 20 9. Specify next point : 15 10. Specify next point : 20 11. Specify next point: 60 12. Specify next point: 80 13. Specify next point: 60 and close 14. Enter Isometricgrid command and enter R for right 15. Select Line command 16. Select start point left corner end 17. Specify next point: 55 18. Specify next point: 15 19. Specify next point: 20 20. Select star

Draft Sight- Orthographic view of V block

Orthographic views for the pictorial diagram-V Block LIST OF COMMANDS USED Line PROCEDURE 1. Set the dimensions in mm and drawing boundary 210 x 297 mm 2. Select line command icon in draw toolbar or type command LINE in command window. 3. For Front View Specify start point» 0,0 [ENTER] 4. Specify next point» @0,10 [ENTER] 5. Specify next point» @-10,0 [ENTER] 6. Specify next point» @0,60 [ENTER] 7. Specify next point» @-10,0 [ENTER] 8. Specify next point» @-25,-25 [ENTER] 9. Specify next point» @0,-5 [ENTER] 10. Specify next point» @-10,0 [ENTER] 11. Specify next point» @0,5 [ENTER] 12. Specify next point» @-25,25 [ENTER] 13. Specify next point» @-10,0 [ENTER] 14. Specify next point» @0,-60 [ENTER] 15. Specify next point» @-10,0 [ENTER] 16. Close 17. Using the snap function draw the projection lines (thickness 0.15mm), Top view and side view. 18. The line style of drawing modified to thickness of 0.70mm 19. Dimension

Edudriveindia

Search This Blog